Sentricon Always Active - The Future of Baiting!

We are proud to be supplying a new termite bait product in Australia! Servicing the Central coast and Newcastle region with a revolutionary new way of killing termites.

Baiting is not only a way of eradicating a termite colony in a home, but can also be used to kill off colonies as they forage for food near a structure - thus providing protection. 

This can be particularly useful when a chemical barrier is not viable due to construction restrictions.  

See the video below to find out how the Sentricon Always active system works!

Sentricon AlwaysActive is the future of termite management; what homeowners have always thought a termite bait should be. But it's not a bait! Active from installation, Sentricon does not contain a bait but a revolutionary termiticide rod. Termite colonies may be eliminated before you ever know they exist!

A Sentricon bait station being checked for activity.

Contact us for a free quote or more information. Ph: 0474 962443

Oodles of delicious sentricon stations ready for installation. The always active rods in the stations will protect the home from the moment we install them!

A Sentricon always active rod is eaten out within months of being installed. This highlights it's palatability.

A Sentricon rod completely eaten out not long after the system was installed.

Drilling & Injecting

Drilling concrete slabs and injecting chemical is one of the ways to protect a property from termites, and then there are obviously variations of those treatment methods depending on the type of construction and requirements of the treatment. However, there have to be a few specifications met to ensure it is done correctly. Here we will highlight a few for you to consider.

Hole Spacings! When holes are drilled to inject termiticide under a concrete slab to treat the footing of a wall, the holes cannot be more than 150mm from the wall. This home had holes exceeding 300mm. Needless to say, the original treatment failed and the home was re infested. 

Injecting Termidor under a slab.

Holes are often drilled around a perimeter to ensure a complete chemical barrier to prevent termites getting in.

Hole spacings on this property exceeded 300mm! Once again, they were beyond specification, holes should be between 150-300mm apart. The greater tolerance is reserved for porous soil types and rarely used in our practice. Ironically this was done on an internal wall that was a 

Once again, hole spacing was beyond specification. More examples below.... 

Termite Hazard map.

We often get asked if a particular suburb has ha high incidence of termite activity. I often have to explain that most areas are! If you look at this map you'll notice that a lot of the highly populated areas of Australia are also zones with high environmental termite pressure!

How to identify termite mudding.

We often get calls when people find some dust, debris or any fine material that appears out of places it probably shouldn't. Good news is, it's not always termites, but it's bad news when it is. How can you identify what it is?

Termites build mud shelter tubes to keep them nice and cozy and moist, they can't be exposed as they will dehydrate and die. So, keeping this in mind, you need to remember that you're looking for nice moist, tightly packed mud. If the termite activity isn't new, the mud may be quite dry and cracked, but it's normally quite dense and difficult to break off. Termites are great engineers, and they will build solid mud tubes that protect them from the outside world.

If you see any debris or something that isn't where it should be, give it a rub with your finger, if it's hard and doesn't break away easily then it could likely be termite mud!

Here are some pictorial examples of what to look for: 

The Termite mudding is clearly visible on this property on the Central Coast, that is, after you remove the paint!

Termite mud packed in between an engaged pier in a subfloor and a dwarf wall. The mud is packed in tightly and does not fall out easily!

This termite activity is quite obvious! However, subtle signs are also present. Notice the bubbling of the paint on the right hand side just below the mudding. This is a sign of significant activity jay below the surface, this is something we look for during inspections as well. This was on a property in Mangrove Mountain.

Termite mud packed in behind this architrave is a dead giveaway. Although it may seem really obvious, sometimes the orientation of the door makes it hard to look at the doorway side on.

Here is a deceptive example:

This appeared like evidence of termites at a distance initially, (it was  up on the top of a garage). Closer inspection revealed that it was just debris made up of dust, fluff and spiders webs. 

How ant capping keeps termites out of a building.

Ant Capping is designed to prevent undetected termite entry.

As with all termite management systems, they are primarily designed to force termites out in the open so they can be easily detected during an inspection, or to deter their entry. For these systems to work effectively, 2 conditions must be met:

1. The physical barrier system needs to be complete, covering all entry points and forming a continuous barrier around the perimeter of the building.
2. The property needs to be regularly inspected to ensure that the system is working correctly and there are no termites trying to infest the property.

Check the following photos that identify common problems with ant capping.

The termites have built a large mud shelter tube under this ant cap, but then you see them mysteriously appear in the timber above the ant cap! If this capping was a continuous barrier for the full width of the brick, they would have to build their mud shelter tube OVER the ant cap.

This explains why termites get in without being seen -  the ant capping does not cover the full width of the brick! This does not meet the Australian standard for termite protection.

This ant capping was only partially existent, with an inspection edge that goes off into oblivion. It was not able to prevent the termites getting in a chewing out this frame.  

The ant cap on this wall ends up butting up to a timber frame, there's no inspection edge and no surprises the termites got in. 

This is the most common failing of ant capping, failing to form a continuous barrier when there is a vertical transition, nothing is preventing the termites coming up between the two piers and into the lower bearer, and it would not be visible until it's too late.